The Amazing Antique Furniture And Art Design

.Slawomir is some sculptures using simple tools like chisel and saw this kind ofnames that manage to make a bicycle from Slawomir Weremkowicz Funsional wood.Slawomir must be something to do menakjubkan.Hanya will .
Even when the seat wood.Dan also consider how to connect your device and detention,steering wheel, pedals and chains,,, Slawomir Weremkowicz pasak.Untuk wooden bicycleis made of wood about creative tahun.Berikut Slawomir Weremkowicz do you use to cut theforest to take pictures of the bike,
Slawomir Weremkowicz, the bike was working out perfectly the first person wood. builtgallery and museum exhibitions have been given to the ambassador to the Netherlands onlyPolandia.

Will give you the necessary technical requirements of using wood in accordance with the properties of the wood used for a particular purpose. The following requirements for a particular purpose, among other things, a kind of wood can be dikemukan:
1st Building (Construction) Technical Requirements: Strong, hard, has a large high natural durability. Species: confusion, Teak Bangkirai, loaded geran, cengal, Giam, lime, Kempas, keruing, Lara, rasamala.
2nd Usual veneers Technical requirements: large-diameter round timber, round, free of defects or severe.
Species: Red Meranti, White Meranti, nyatoh, ramin, agathis benuang.
3rd Fancy Veneer Technical Requirements: In addition to the above conditions, you need a decorative timber value. Species: teak, ebony, rosewood, nails bongin, Dahu, results, Rengas, Sungkai, Weru sonokembang.
4th Furniture (furniture)
Technical Requirements: Weight Dimensions, Turner, easily completed easily embedded, decorative, twisted bound stable and will be truncated.
Species: teak, ebony, nails, mahogany, meranti, Rengas, Rosewood sonokembang, Ramin.
5th Floor (floor)
Technical Requirements: a hard, high abrasion power, acid-resistant, light shod, and very strong. Species: confusion, Teak Bangkirai, loaded geran, bintangur, bongin, Bungur, nails.
6th Railway bearing test rigs
Technical Requirements: Strong, tough, stiff, durable.
Species: confusion, Bangkirai, geran loaded, loaded bedaru geran, bintangur, Kempas, theory.
7th Sporting Goods
Technical Requirements: Strong, not easily broken, soft, smooth texture, rich in fiber, fiber lines and a long, stiff, pretty durable.
Species: Agathis, teraling bedaru, Jessamine, merawan, nyatoh, salimuli, rosewood.
8th Musical Instruments
Technical Requirements: Fine texture, easily a non-continuous fibers, good 공명 share.
Species: chrysolite merawan, nyatoh, teak wood, ebony and results.
9th Photo Tool
Technical requirements: light, smooth texture, clean colors.
Species: jelutung, Jessamine, Pulai, pine.
10th Tong Wood (Gentong)
Technical requirements: does not remove the fluid does not report the odor.
Species: confusion, Bangkirai, teak, pairs.
11th Electric and telephone poles
Technical conditions: wind, light, very strong, strong, straight.
Species: confusion, Giam Teak, Kulim, Lara, merbau, tembesu theory.
12th Statues and pieces of wood
Technical Requirements: textile cleaning, hard, soft texture, tough, not brittle and dark.
Species: Teak, Rosewood, salimuli, Jessamine, Cempaka, Ebony.
13th Matches
Technical requirements: the same as the requirements for a (children’s games) elastic and strong enough to light (box) is not defective.
Species: Agathis benuang, cashew nuts, hazel nuts, sengon, perupuk, stretched Pulai the pines.
14th Pencil
Technical Requirements: BJ slightly curved, slightly cut as the middle of a reddish color, straight fibers. Species: Agathis, jelutung, jasmine and pine.
15th Moulding Technical requirements: easy, very material, soft texture, easy to use, easily nailed.Decorative, smooth, bright colors.
Species: jelutung, Pulai Ramin, Meranti and so on.
16th Shipping Keel Technical Requirements: not easy to break, have a marine animal.
Tree species: theory and lime.
Ivory Technical Requirements: Strong, tough, not easily broken, a marine animal.
Species: Bangkirai Bungur, lime.
Senta Technical Requirements: Strong, tough, not easily broken, a marine animal.
Species: Bangkirai Bungur, lime.
Skin Technical Requirements: soft, but powerful, strong, resilient marine animals.
Species: Bangkirai Bungur, Red Meranti.
To build a computer equipped
Technical requirements: light, sturdy and durable is not easily broken by vibration of the engine. Made of lime, red meranti, Medang, theory, Bangkirai.
Sealed propeller shaft Technical Requirements: Clay knows, I do not damage the soft metal.
Species: jackfruit, Bungur, sapodilla. Weapons of ass
Technical requirements: light, strong strong, durable, dimensionally stable.
Species: Hibiscus, salimuli, tick.
17th Charcoal (fuel) Technical Requirements: High School BJ.
Tree types: mangroves, kesambi, walikukun, fir, glam, gofasa, Johar, rotten trees, nyirih, rasamala, puspa, simpur.

1. Pull Reliability
Tenacity is the tensile strength of wood to resist forces that attempt to get the wood.There are 2 (two) types of resistance determination, namely:
a. Reliability direction parallel to the tensile strength of fiber and
b. Direction perpendicular to the pull of the reliability of the fiber.
Tensile strength of wood is the largest company in the direction parallel to the fiber pulling. Tensile strength to the fiber direction is lower than the tensile strength parallel to the fiber direction.
2. Reliability press / compression
Print reliability / compressive strength of wood to hold the charge / load. There are 2 (two) types of printing consistency are:
a. Reliability printed parallel to the fiber direction and
b. Reliable printing direction perpendicular to the fibers.
In every sense of the wood perpendicular to the fiber is less than the determination of compression parallel to the fiber direction.
3. Reliability scroll
Reliability is the ability to slip into the wood to resist the forces that make a piece of wood has also been moved to other neighboring parts. There are 3 (three) types of persistence, namely:
a. Reliability sliding direction parallel to fiber
b. Reliability sliding direction perpendicular to the fiber and
C. Reliability sliding sideways
Reliability of fibers perpendicular to the cut is much larger than the direction parallel fibers in the determination of the cut.
4. Reliability curve (flexible)
Reliability curves / flexible is the power to resist the forces trying to bend the wood to withstand dead loads and live load than the hands. There are 2 (two) types of persistence, namely:
a. Static toughness arc is the resistance of wood to maintain the power to him slowly.
b. Tenacity arc, ie the strength of wood to hold the force of him suddenly.
5. Rigidity
Rigidity is the ability of wood to resist changes in shape or curvature. Stiffness is expressed in the form of elasticity.
6. Tenacity
Persistence is the ability of wood to absorb a relatively large number of staff or resistance to shocks and stresses several times that transcends borders and lead to proportional changes in the form of permanent damage and partial.
7. Violence
Violence is the ability of wood to withstand the forces that make notches or nicks or scratch (abrasion). Together with the tenacity, hardness is a measure of resistance pengausan wood.
8. Perseverance Glass
Reliability is the ability to chop wood to resist forces that attempt to split the wood.The low sides firmly nature very good for the manufacture of tiles and wood. Unlike the constant high sides are great for making sculptures (sculptures). In general, the wood split easily along the radius (radial direction) than in the tangential direction.
Dimensions used to describe the properties of wood-atan Kekui or its mechanical properties are expressed in kg/cm2. Factors affecting the mechanical properties of wood about classified into two groups:
a. External factors (external): wood preservation, humidity, loading and disability caused by a fungus or wood destroying insects.
b. Factor for wood (interior): BJ, eye abnormalities of wood, fiber, etc. italics

In our daily life, wood is a material that is used very often for a particular purpose.Sometimes a particular item, the wood can not through other materials, because their characteristics are replaced. We as users of wood that has any kind of different characteristics, it is necessary to know the properties of the wood, so that the selection or determination of the type for a particular purpose must use really fit what we want. Here are the properties of wood (physical and mechanical) and their applications are described.
The introduction of wood properties
Forest products is an easy-to-be moved in accordance with the process of technical progress. Wood has several properties that can not be replicated by other materials.To use the selection and use of wood for a purpose that requires knowledge of the properties of wood. These qualities were crucial in the woodworking industry because of the nature of knowledge can not only choose the right kind of wood and the variety of applications are possible, but it can also be selected to be replaced by wood from other species if the species is difficult to obtain continuous or too expensive.
Wood from different tree species have different characteristics. Even within a single tree, wood has different properties. Of the many properties of wood are different from each other, there are some common features are found in all types of wood:
1st Wood is from cells that have different types and composition of their cell walls are made of chemical compounds in the form of cellulose and hemicellulose, cellulose (carbohydrates) and lignin (a non-carbohydrate) together.
2nd All wood is anisotropic, ie, show different properties when three main directions (longitudinal, radial and tangential) were tested.
3rd Wood is a material that is hygroscopic, the absorption or moisture (humidity) release as a result of changes in humidity and temperature of the surrounding air.
4th Wood can be affected and may be burnt by diseases and pests, especially in its dry state.
Physical properties of wood
1st Weight and gravity
The weight of wood depends on the amount of wood dust, the cell cavity, the moisture content and extractives. Weight of a timber is directly proportional to its BJ. Wood has a specific gravity that varies between a minimum of BJ 0.2 (balsa wood) to BJ 1.28 (Nani wood). Generally, the higher the BJ Wood, heavier and stronger.
2nd Preservation
Durability is the resistance of the wood caused by external elements such as wood-destroying fungus attack, termites, powder, etc.. Durability of wood extractives in the wood, which is caused toxic to wood destroying elements. Extractive substances formed when the wood is converted into a wooden pig on the terrace, so the wood is generally more durable than wood patio pig.
3rd Color
Through the fill color colorful timber to another timber causes.
4th Structure
The texture is the relative size of the cells of the wood. Kempas, Meranti, etc.: Based on texture, wood is fine-textured wood (eg, Giam, Kulim, etc.), medium-grained texture (such as teak, rosewood, etc.) and raw wood (ie classified .).
5th Grain
Grain is the general direction of the cells of the wood from the trunk axis. The direction of the fibers can be used in straight fibers, fiber blends, wavy fibers and fibers are twisted and diagonal (oblique fibers) divided.
6th Raba impression
Impression of touch is the impression, by touching the wood surface (rough, smooth, slippery, cold, oily, etc.) are obtained. Was impressed with any type of wood depends on the nature of the wood, humidity, level of extractives in the wood.
7th Smell and taste
The smell and taste of the wood easily lost when the old wood stored outdoors. Some species have scents, and encourage explain the smell of wood, often used the scent of something universally known objects, like the smell of onions (Kulim), the smell of tannin (identity), the smell of camphor (lime) and so further.
8th Decorative value
Picture of wood depends on the distribution of color, the direction of the fibers, texture and appearance of the increment-increment growth in certain patterns. These image patterns, something that the type of wood makes a decorative value.
9th Hygroscopic
Wood has the properties of water can absorb or release. The more humid air in order to achieve the higher the humidity the wood around the equilibrium with its surroundings. The moisture conditions with humidity around him as the equilibrium moisture content (EMC = Equilibrium Moisture Content).
10th Wood properties of sound, consisting of:
a. Acoustic properties, namely the ability to forward voice is closely related to the elasticity of the wood together.
b. Resonance properties, which helped bergetarnya wood caused by sound waves.Quality wood tones are very well spent, so the wood is widely used in the manufacture of musical instruments (Kulintang, guitar, violin, etc.).
11th Thermal conductivity
Conductivity of the wood is very bad, so that the timber for items that are used directly on the heat source in context.
12th The electrical conductivity
13th In general, wood is the material conductivity of the poor to electricity. The electrical conductivity is influenced by the moisture content of wood. At 0% water content, the wood is a good electrical insulation material is completely different if the wood contains the maximum water (wet wood), then the power hantarnya almost equal to the conductivity of water.

how to choose the right color of paint.

1. Note the color of your roof. If gray, then you can freely choose any color because gray is a neutral color that can match any color. If you are critically chocolate, you should choose a color like chocolate, like beige, beige, yellow, pale khaki and accent colors such as terracotta and brown. If the color of your tiles to the roof of the house tend to be red or brown, then choose soft colors like beige, khaki and gray.
2. Consider also the color of your home. If the inside of the house of their beige tones do not choose a color with shades of gray, because it causes disharmony which can cause discomfort. If the part in warm colors like yellow, brown, and then choose a warm neutral color like beige. Meanwhile, when the shades of blue or green, then you can choose the color of gray on the outside.
3. Do not choose colors that are too light or dark and gloomy, it is easy to change a memorable one. Choose neutral colors so the color is more durable, and often you need to paint the house.
4. If the front of your home with natural stone, also consider compliance with the stone’s color.
5. If there is a large empty field, use different colors for darker or you can create textures such as stripes and a rough texture to the wall is different and not impress empty.
6. ask / buy a shop building colors. Then choose a color outside the home is not home so you can choose the right color.
7. Photos of your home, then make a copy of some pages. Give color using colored pencils in the colors you use. This way you can imagine how the atmosphere of the house with these colors.
8. Before you buy ink in bulk, buy smaller cans on the wall and then apply a small amount (1 x 1 m2) for you and your family can imagine better.
9. Last but not least, make sure that the whole family is in agreement with these colors

Hopefully these tips can be useful.

WEST bathroom door, especially with water contact with water, cook the factors that affect the durability. You first choose the material leaves the door to the bathroombefore you consider the following points:
Wood material is not recommended for use in wet bathrooms. Fried water is exposed to light on the weathered wooden door and damaged. In general, the damage to thetop of the door, and then start on the ground.
The bathroom door can be aluminum an option. Fried also holds water, aluminum, corrosion (rust) protection. The contact with water, fried, and the tropical atmosphereand less compatible with traditional door sills are the disadvantage of relatively loud.
Plastic is stronger than wood and aluminum doors. Plastic injection molding machine(form) by the type of plastic (PVC) is a blank design statement is pretty robust and waterproof. A more elegant appearance, personality, and flexible vinyl door panels,you can taste and color.
Glass materials, but is very popular in Indonesia, but because it started artistic andmodern feel in love, and. Be is used to give you instead of glass to create the impression of varied size and bathroom ventilation is too big

Feel it’s time to update the exterior of your house painted? Or change color?
Outside the house, in theory, around your house, depending on natural conditions, a minimum of 6-8 years is required for each update. You must first, however, that if you want to make plans in advance to reduce unnecessary risks.
Here are some tips for planning a picture outside:
1. Before you can check your physical home, before making a painting, is well known.Despite the damage, and its handle is fixed, arched doorways, or that Windows needs to see if there is a wall. Before starting to paint the outside, it is best if it is correct.
2. If you want to change the color of exterior paint, the wrong choice of a fatal mistake, because, to consider carefully. Neighborhood, house style and in consideration of your stuff. Bidabedi conflict with any conflict, or more different color. Before it is applied directly to the wall of your house, maybe you can paint the color of the Swatch book, (such as a color catalog) and must play in the earliest.
3. You can still do it, but the color of the night, you need to buy one color of paint.Remember, every change of color of the standard wall paint brands. So you can buy the brown as the color of the 2 brands, but it is applied to a variety of looks between them, kecoklatannya level. So that is exactly the same color than the color, the best being a previous purchase of the same make and color.
4. Note the details of your home. Mainlah a little color ‘and playing, for example, if the overall color of a different color for the accessories that can be activated. Do not be afraid to experiment.
5. If you want to use the market price of a product, select the first color Surveylah. The price, durability and color as keenceran. If you have a house to make a series of more durable (waterproof), select a color to be waterproof.
Bring in a new environment, and new exterior colors are also bringing a new spirit.Congratulations to work and play!
Berry

Modern style home is growing rapidly, supported by our society’s modern lifestyle.The effects of modern living, including the processing style of residential architecture.
The modern sense, “modern, the modern”. So that when applied to architecture, primarily residential agents has become more or less, a house style or the latest cutting edge technology. With characteristic clarity and honesty of this style of building or building a wall of rock without risks such as the use of finishing materials, especially in the use.
Modern architectural styles such as still in the design style, modern, modern, minimalist, modern, fashionable, and the shares are in the natural flow of the other.Each has a specific design rules. But the discussion this time, we discussed only produced in a range of minimalist modern architecture.
Minimalist design, modern design style in the context of the principle of reducing, and which is very functional form of embellishment or decoration on a cell, the flow is more and form follows function. Size of building and remodeling scheme is minimalist and simple.
And interior and furniture that make up about in the atmosphere?
Of course, the building should be adapted with minimalist style. It can be very hard on the eyes when the two are not aligned. Modern minimalist style house with a minimalist interior and furniture will be as well supported by.
Interior and furniture design in a minimalist modern design here are a few examples are adopted.
Minimalist sleeping space, you are simple geometric shapes, can not even use the arc or curve. Or have a headboard that is simple to choose a bed with bed, or if you want to give a little decoration, room sound, a headboard that a geometric ornamentation, which is not very complicated selection Please. For a side table and wardrobe, you can also have elements that are in harmony with geometric beds.Lights or parking lights for reading, you’re finally on the market using the standard form with the use of a lamp. Choose a simple shape.
Modern minimalist design style can also be used in bathrooms. Washtafel rectangular or square shape, is very representative of this design style. To accomplish this, you are just a mirror, rectangular or square shape is needed. If you prefer, you towels or other sanitary facilities for the storage cabinet or cupboard can put some fruit.
Dining room, meaning furniture, with the monotonous minimalist dining room of an apartment does not. You can use furniture that is versatile, but still a common issue with each other. Here and there a simple vases and frescoes (wall art) as a garnish, add. The lamp has a warm light, adding to the atmosphere is great for when food is in progress with Choose a chandelier. Dining area under the rug or carpet, do not forget to add. Many, many colors to choose carpet is not easy. If you want a variety, perhaps you could look on the carpet playing with the texture, but still in the same color.Choose a closet or cabinet note also easy to handle, because in general, that makes a closet or cabinet, is more than just control it.
Living room or family room is usually the center of a home. In general, the family live together, either before or after mixing to daily activities. Need the environment here is a relaxed, informal and playful interested. Attention usually is in the living room couch.Choose a sofa that is very simple, it is better if you light up a playful mood, color selection, but of course depends on personal taste.Customize your design style closet, bookshelf, TV stand, end tables, coffee tables and other items too.But you keep the decorations should not dominate your living room.
For those of you a work at home, you choose, furniture, furniture that is easy to do on the page as shown in the photo. Solid lines are lines of furniture decoration. In order for a change, you still lamps, vases and rugs can play around with such decorations, but it must be remembered that the decorations will adorn. Should not dominate the interior decoration.
Or if possible, we use the services of interior designers can use.

Sofa sofa … New!

Yes, you should be happy, if one is held on the new couch in your favorite room in the house. However, if your sofa is located option available space right? Maybe, maybe not. If not, maybe you have not done one of the things that should be considered when you are going to buy a sofa, the following:

* Change the big room with a sofa
Thinking with the heart – the heart of you punyai.Sofa space that is large enough to show, but if the sofa is too large, then it will be the fourth “fulfilled the couch” and any other tools that can be.

* Color Fabrics
Heart – the heart in choosing the color of the screen to the room of your home, matching the theme and color of a room when itu.Buatlah experience, going to several stores to see – you see the color mendukung.Setelah fixed number of colors, so bring your color samples and the colors in your game.

* Quality
Just looking couch, sometimes – sometimes very difficult to distinguish in terms of quality, especially if the couch is worth more than hundreds pounds.Apabila buy a sofa for an extension of credit available, then the price of the mempermahal original price of credits on the sofa, so the price can not be used as a reference to determine that a sofa kualitas.Kwalitas can see in many things, including:
1.The strong structure
2. Pillows – pillows and should their upholstery fabrics to be really – really neat and meetings
3. Spring is on the side and rear
4. The material quality mitigation
5. Yarn – yarn / stitches are nice and clean

* Input
Some people are beautiful entrance, but if you are looking for a large sofa or you live upstairs, according to your heart – the heart of the entrance to the sofa.
If you are doing all the above, congratulations, you have a beautiful sofa and suited for your home!

Antiques are not just a factor in the home, but also become the expression of the prestige of the owner. This is because the characteristics of antiques is a high value because of age, rare and hard to find. Usually, household goods, furniture and decorative art objects.
It is clear antiques have passionate fans of its own. Here are some tips for you lovers of antiques, including:
* The first thing to consider is the uniqueness and history of the antiques that you want to buy. The more rare the higher price. Certainly do not want to be fooled into paying top for a fake antiques. So, if you suspect would be better to cancel originally intended to buy. Uniqueness that makes it a valuable antique.
* Perform a thorough examination of your coveted item. Internet is the best place to start. Also note, if the document is a reproduction of goods only. If you are new to the world of antiques, of course, is quite difficult to distinguish where the original and reproduction. But if you look really, really seems like everything is old and older to use any reasonable damage here and there.
* A good place to hunt for antiques is on auction. Usually they are actually providing goods and original antiques, and some even include a certificate of authenticity. Do not buy over the Internet, because you need to exploit the “feel” its ancient before buying.
Get how to treat them if you buy antiques. Each element can take several treatments. Similarly, storage and location, such as humidity and sunlight to live.
Instead, choose antique describe personality, style and your taste. Buy antiques that love and care as well. A stock is selected by the liver can become an indispensable part of your home. In fact, if disclosed to the child, can be part of family history.